Co2 incubator from Thermo

CHF 4'999.00

Co2 incubator from Thermo

Co2 incubator from Thermo

The incubator works.

Co2 sensor tested

Manufacturer information

Approximate cycle length: 14 h

Optimized airflow system does not affect samples or incubation

Optional integrated VOC filter system removes volatile organic vapors

Hepa air filter system integrated into the chamber continuously removes particles to meet cleanroom class 100 conditions

140°C sterilization cycle prevents contamination of internal surfaces

An audible alarm is triggered if the outer door is opened during the cycle or if the temperature reaches 60°C or more

Heat-resistant TC sensor can be left in place during the cycle

HEPA filter and IR sensor can be easily removed

An access code prevents accidental cycle starts

Microprocessor control

An alphanumeric message display shows temperature, CO2 and (optional) relative humidity parameters in an easy-to-read manner

Audible/visual alarm with Mute button

Setpoints for temperature, over temperature, CO2

Configurable audible signal for power on/off, access code, HEPA filter change reminder, remote alarm contacts, low temperature tracking and alarms for high or low CO2 levels

Construction

Polished stainless steel interior with rounded corners is easy to clean

Robust stainless steel shelves and brackets can be removed without tools.

Sterile filters on gas inlet and sampling ports are easily accessible

Removable inner door seal continuously adjusts to ensure a tight seal

Specification

Capacity (English)

6.5 ft.³

Data output

Optional 4 – 20 mA

Capacity (metric)

184 l

CO2 concentration range

0 to 20%

Lighting

LED

Oxygen control

None

Temperature range (metric)

Ambient temperature +5 °C to 50 °C

Humidity source

Water pan

Dimensions (L x W x H)

63.5 x 66.8 x 100.3 cm (25 x 26.3 x 39.5 in.)

Electrical requirements

230 V, 50/60 Hz

Certification/conformity

UL, cUL, CE

Description

Forma Steri-Cycle CO2 incubator

Chamber material

Brushed stainless steel

CO2 sensor technology

TC sensor

Material

Stainless steel

Relative humidity

90% at 37°C

Type

CO2 incubator

Interior dimensions (D x W x H)

50.8 x 54.1 x 68.1 cm (20 x 21.3 x 26.8 in.)

Weight (Anglo-American)

260 lbs.

Voltage

230 V

Categories: ,

Description

Co2 incubator from Thermo

Co2 incubator from Thermo

The incubator works.

Co2 sensor tested

Manufacturer information

Approximate cycle length: 14 h

Optimized airflow system does not affect samples or incubation

Optional integrated VOC filter system removes volatile organic vapors

Hepa air filter system integrated into the chamber continuously removes particles to meet cleanroom class 100 conditions

140°C sterilization cycle prevents contamination of internal surfaces

An audible alarm is triggered if the outer door is opened during the cycle or if the temperature reaches 60°C or more

Heat-resistant TC sensor can be left in place during the cycle

HEPA filter and IR sensor can be easily removed

An access code prevents accidental cycle starts

Microprocessor control

An alphanumeric message display shows temperature, CO2 and (optional) relative humidity parameters in an easy-to-read manner

Audible/visual alarm with Mute button

Setpoints for temperature, over temperature, CO2

Configurable audible signal for power on/off, access code, HEPA filter change reminder, remote alarm contacts, low temperature tracking and alarms for high or low CO2 levels

Construction

Polished stainless steel interior with rounded corners is easy to clean

Robust stainless steel shelves and brackets can be removed without tools.

Sterile filters on gas inlet and sampling ports are easily accessible

Removable inner door seal continuously adjusts to ensure a tight seal

Specification

Capacity (English)

6.5 ft.³

Data output

Optional 4 – 20 mA

Capacity (metric)

184 l

CO2 concentration range

0 to 20%

Lighting

LED

Oxygen control

None

Temperature range (metric)

Ambient temperature +5 °C to 50 °C

Humidity source

Water pan

Dimensions (L x W x H)

63.5 x 66.8 x 100.3 cm (25 x 26.3 x 39.5 in.)

Electrical requirements

230 V, 50/60 Hz

Certification/conformity

UL, cUL, CE

Description

Forma Steri-Cycle CO2 incubator

Chamber material

Brushed stainless steel

CO2 sensor technology

TC sensor

Material

Stainless steel

Relative humidity

90% at 37°C

Type

CO2 incubator

Interior dimensions (D x W x H)

50.8 x 54.1 x 68.1 cm (20 x 21.3 x 26.8 in.)

Weight (Anglo-American)

260 lbs.

Voltage

230 V

Add to cart